Glensound Electronics Logo

UK : 01622 753662

International : +44 1622 753662

sales@glensound.co.uk

Where to buy

Product Categories

Balance Converters AD/DA Converters 4 Wire / IFB Systems Commentary Systems DANTE Network Audio Distribution Amplifiers Euro Rack System Headphone Amplifiers ISDN Codecs & Mixers Intercom Level Controls Line & Tone Idents Metering (Audio) Microphone Amplifiers Mixers Monitoring Audio Mobile Phones Snakes (Digital Audio) Simultaneous Interpretation Silence Detector Signature Series Switch Units Telephone Hybrids Transformer Isolation USB/Smart Phone Interfaces/Mixers ----- MORE -----

Contact Us

Contact

Call
+44 1622 753662

Clodis Front CAT Zone amps MPI004 Angle CAT FW033 Front CAT

Roaming EQ Twin general purpose mono EQ

The Roaming EQ is a small robust twin mono EQ for general purpose use. The unit has 2 identical high quality mono EQ ‘s with relay and transformer balanced XLR inputs and outputs.\r\n\r\nInputs and Outputs\r\nEach EQ connects via a transformer balanced XLR input and output.\r\n\r\nRelay\r\nShould the batteries run out of power, the relay allows the audio to flow freely through the circuit without EQ ensuring connection is never lost.\r\n\r\nLF Shelf\r\nThe low frequency shelf allows the user to set the low end roll off using a rotary pot between 20-220Hz. \r\n\r\nLF Cut/Boost\r\nThe low frequency is selected using the toggle switch from either 220Hz or 390Hz. This can then be cut/boosted by up to +/- 12dB using the rotary pot.\r\n\r\nPresence/Mid Cut/Boost \r\nThe presence/mid frequency is selected using the pot ranging from 640Hz to 6k4. The selected frequency can then be cut/boosted by up to +/- 12dB using the rotary pot.\r\n\r\nHF Cut/Boost\r\nThe high frequency is selected using the toggle switch from either 2k2Hz or 3k90Hz. This can then be cut/boosted by up to +/- 12dB using the rotary pot.\r\n\r\nHF Shelf\r\nThe high frequency shelf allows the user to set the low end roll off using a rotary pot between 20kHz and 2k2Hz. \r\n\r\nPower\r\nThe Roaming EQ is powered by 3 x C cell batteries or external 5V USB power. As the battery level decreases there is a lower power LED for indication; as the level drops, the LED will start to flash faster and faster.

Roaming Compressor Battery powered twin mono or linked stereo compressor

2 x Compressors\r\nThese can operate independently or in the joint stereo mode.\r\n\r\nCompression Threshold\r\nUsing the rotary pot the threshold of the compressors can be set between +/- 10dB.\r\n\r\nCompression Ratio \r\nThe compression ratio can be set using the selector switch to 1:1, 5:1 or 10:1.\r\n\r\nCompression Recovery Time\r\nRecovery time can be selected to fast, auto or slow.\r\n\r\nCompression Indicator\r\nEach compressor has a 4 LED scale indicator to represent the level of compression being applied.\r\n\r\nStereo/Mono Options\r\nSelectable using the toggle switch.\r\n

Stereo\r\nSwitched to the stereo option, the compressors work together (the settingsmust be the same in order to prevent different compressions on each channel).

\r\n

Mono\r\nSwitched to the mono option, each compressor works independently.

\r\nInputs and Outputs\r\nEach compressor connects via a electronically balanced XLR input and output\r\n\r\nPower\r\nThe Roaming Compressor is powered by 3 x C cell batteries or external 5V USB power. As the battery level decreases there is a lower power LED for indication; as the level drops, the LED will start to flash faster and faster.