Glensound Electronics Logo

UK : 01622 753662

International : +44 1622 753662

sales@glensound.co.uk

Where to buy

Product Categories

Commentary Systems 4 Wire / IFB Systems DANTE®/ AES67 Network Audio Distribution Amplifiers Headphone Amplifiers Intercom Level Controls Microphone Amplifiers Mixers Monitoring Audio Mobile Phones Snakes (Digital Audio) Simultaneous Interpretation Signature Series Telephone Hybrids Switch Units USB/Smart Phone Interfaces/Mixers ----- MORE -----

Contact Us

Contact

Call
+44 1622 753662

GC25J Angle BAN GC25J Rear BAN GC25J Front BAN GC25J Top BAN

GS-GC25J
Portable ISDN Codec With Full Talkback Facilities

Features Description Downloads Ask a Question
  • INDIVIDUAL TALKBACK CONTROLS FOR EACH INPUT
  • TWO G722/ G711 Codecs
  • INBUILT TERMINAL ADAPTER
  • EASY TO OPERATE
  • USES PROVEN ISDN TECHNOLOGY
  • +12v PHANTOM POWER
  • SIZE ONLY 145 x 204 x 80 mm (wxdxh)
  • BATTERY OPERATED FROM 2 'D' CELLS

This very small & highly portable ISDN reporters/ commentators box has been designed using our extensive experience of ISDN & commentators equipment. This new unit offers excellent facilities in an extremely small package yet uses tried & tested ISDN technology.

The GSGC25 has an inbuilt three channel mixer, each of the channels are mic/ line switchable and have +12v phantom power available. Each of these channels has a gain control, large on/off pushbuttons & an on indicating LED. The mixed output of these channels are fed through a compressor/ limiter and are sent to the program line Codec, this output is also on a rear panel 'bantam' jack. There is a 7 LED PPM for indication of the mixer output level.

Three momentary talkback buttons (which also have a permanent on (Lazy) switch), switch the corresponding input of the mixer to the talkback line Codec.  This talkback also appears on a rear panel 'bantam' jack. An indicating LED shows when talkback is in use.

Monitoring is provided from 4 sources, each with it's own level control and each can be switched to both (left & right) or either (left or right) channels of the headphone amplifier. These 4 sources are: TALKBACK from the 2nd Codec or from a rear panel input on 'bantam' jack: CUE the return feed of the program line Codec: EXT a local external input on rear panel 'bantam' jack: MIX the output of the mixer. The headphone amp output is on three front panel A/B gauge headphone jack sockets, one wired to only the left channel of the headphone amp, one wired only to the right channel & one wired to both. The headphone amplifier is for headphone impedances of 200 to 2000 Ohms.

A record output (on a rear panel 'bantam' jack) is a mix of the output of the GSGC25's mixer and the return programme cue line.

For ISDN line dialling, answering and Codec set up functions a front panel keypad is provided. A 3 position toggle switch, switches this keypad to control either the programme line, the talkback line or a safe function that prevents the keypad from being used accidentally. Each of the 2 G722/ G711 Codecs has a large green LED to show when Codec lock is O.K. and also a large red LED to show when an ISDN line is open.

The GSGC25 can be powered from 2 'D' cells (approximate battery life of 4 hours) or an external plug top psu. If it is being powered from the external supply and the supply fails the batteries will automatically take over. A front panel LED shows when the GSGC25 is switched on and flashes to indicate when battery level is low.

Please use one of the following methods to contact us:

Telephone: 01622 753662
International: +44 1622 753662
Email: sales@glensound.co.uk
Skype: Glensound Gavin
Online: contact form